Ctube ENT Electrical Conduit PVC Flexible Nonmetallic Tubing – Grey

In current projects, we need a product that is lightweight, easy to bend, and resistant to corrosion. It can help us install and wire in more complex landscapes such as corners. It is the origin of ENT flexible electrical conduit.

We need higher-grade raw materials, better design, and production processes than a normal flexible conduit. To meet the relevant requirements of UL 1653, we have upgraded raw materials, processes, and formulations. At present, our quality has fully met or exceeded the relevant requirements of UL.

At the same time, to adapt to harsh environments such as being directly buried in concrete, we have fully considered every detail of the product to ensure that the corrugated pipe will not have problems in actual use (such as a wall or floor installation).

In a word, ENT flexible electrical conduit is lightweight, high strength, can be directly buried, and easily and completely adapted to different environments, saving many labor costs for your project. So it is widely used in home decoration, hospitals, government projects, etc.

Feature,

UL LISTED. Ctube ENT flexible conduit are UL listed. And the quality meets or exceeds UL standards.

Concrete Tight. Perfect match with concrete and underground environments, We offer up to 50 years of warranty and ensure you use it confidently.

Impact Resistant. Up to 2.7J (2.0ft-lbf), anti-impact won’t break or crack when installed.

High Fire Rating. UL94 fire rating. Cut off the fire source will extinguish itself within 5s to ensure the safety of your project.

Flexible & Strong. Up to 170 lbs pull resistant yet very flexible, for easy pulling wires in the corner.

Trusted Partner. 11+ years of export experience to Unite States and services 100+ companies in USA & Canada. Ctube is the most trusted supplier of electrical pipes in Asia.

Specification

Markings

The following should be clearly and permanently marked on the ENT tube at intervals of not more than 1.5 m (60 in):

content:

1. a) the manufacturer’s name, trademark or other recognized identifier;
2. b) “ENT” type;
3. c) construction material “PVC”;
4. d) Metric and Imperial dimensions, such as 16 (1/2);
5. e) “FT4” when tested according to clause 7.3; CSA C22.2 NO.227.1-06 UL 1653 21
6. f) production code (date of manufacture);
7. g) “for residential attics 900 mm (3 ft) above the bottom of the ceiling joists” when the ENT material complies with clause 4.1.4;
8. h) In the United States, when the manufacturer has multiple plants producing electrical non-metallic bellows, identify the production plant. In Canada, subparagraph (h) does not apply.
9. i) In Canada, trade size 63 (2-1/2) should be marked “Canada Only”.

The smallest package of finished cut lengths, rolls or reels shall be marked with:

1. a) the manufacturer’s name, trademark or other recognized identifier;
2. b) “ENT” type;
3. c) construction material “PVC”;
4. d) Metric and Imperial dimensions, such as 16 (1/2);
5. e) the total length of the product in the package;
6. f) the manufacturer’s instructions for fixing the solvent connection fittings (this mark may appear on the packaging or in the accompanying booklet);
7. g) “For residential attics 900 mm (3 ft) above the bottom of the ceiling joists” when the electrical non-metallic bellows material complies with Section 4.1.4.
8. h) In Canada, trade size 63 (2-1/2) should be marked “Canada Only”.

Additional properties